Car Specs

Stud Studebaker Daytona

Information

Studebaker

Quick Facts

Build Start: Stud

Available in other variants

read more »

Specifications

General

Build Start: Stud
Model Variant: Daytona

Dimensions

Track/tread (front): 1461mm
Length: 4826mm
Height: 1391mm
Fuel Tank Capacity: 68.2litres
Wheelbase: 2769mm
Track/tread (rear): 1435mm
Width: 1810mm
Ground clearance: 165mm
Kerb weight: 1456kg

Body Details

Body Type: 4/5 seater sedan/saloon

Engine Details

Engine Coolant: Water
Aspiration: Normal
Engine Position: front
Gearbox: 3 speed automatic
Final Drive Ratio: 3.31
Cylinders: V 8
Bore × Stroke: 98 × 76mm
Catalytic converter: N
Engine Layout: longitudinal
Top Gear Ratio: 1
Engine Type: naturally aspirated petrol
Capacity: 4.6 litre (4627cc)
Bore/stroke ratio: 1.29
Compression Ratio: 9.25:1

Our Sponsor

Performance

Power-to-weight ratio: 135.79 PS/tonne (1000 kg)
Drive Wheels: rear wheel drive
Weight-to-power ratio: 10.01kg/kW

Fuel Consump.

Fuel system: 1 Ro carb

Chassis & Geomtry

Rear suspension: LA.SE.
Length:Wheelbase Ratio: 1.74
Front Suspension: I.CS.

Brakes

bmep (brake mean effective pressure): 1048.3kPa
Brakes F/R: Dr/Dr

Other

Valve Gear: overhead valve (OHV), 2 valves per cylinder, 16 valves in total
maximum torque(Gross): 386 Nm (285 ft·lb) (39.4 kgm)at 2400 rpm
Specific torque(Gross): 83.42 Nm/litre, 1.01 ft·lb/cu3
Unitary Capacity: 578.38cc
RAC rating: 47.6
maximum power output(Gross): 198 PS (195 bhp) (145 kW)at 4800 rpm
Specific output(Gross): 31.4 kW/litre42.7 ps/litre, 42.1 bhp/litre0.69 bhp/cu in

Sponsored Ads